<button id="htgss"></button>

<rp id="htgss"><ruby id="htgss"><input id="htgss"></input></ruby></rp>

    1. 歡迎您訪問中科聚峰機械有限公司網站!
      您的位置: 首頁 > 新聞資訊>>小型攪拌車的新車培訓注意事項




      • 安全使用規范是什么?
      • 聚峰混凝土攪拌車,您的選擇!
      • 高效作業的前提:即正確使用混凝土攪拌車
      • 聚峰帶你了解混凝土攪拌車的價格
      • 聚峰淺談自上料攪拌車
      • 中科聚峰廠家告訴你如何使用小型混凝土攪拌機


      新聞資訊 /news


      來源:http://www.wanyituangou.com/ 日期:2022-07-06
      For users who purchase new equipment, after the equipment arrives at the customer's delivery place, special after-sales personnel will carry out a series of related training with customers, such as one-on-one new car training, initial start-up construction training, which will ensure the smooth start-up and construction of new cars. The smooth construction of the small mixer truck before driving directly affects the customer's subsequent trust and recognition of the product, so we have always attached great importance to this aspect! So how can we ensure the smooth construction of new cars?
      1. After sales personnel will communicate more with customers and introduce the characteristics of concrete in detail, including fluidity and pumpability, so that users can have an integrated understanding of it.
      2. It allows users to control the amount of materials from the root and save construction costs. The forklift bucket is controlled at 0.3 to 0.35 cubic meters per shovel. Communicate with the forklift master more, not more than one shovel per shovel. Each time, a flat shovel of sand and a flat shovel of stone are equipped with at least 2 bags of cement, which not only ensures the quality of concrete, but also ensures the smooth pumping of concrete, so as to avoid pipe blockage of the mixing pump.
      3. Due to different regions, there will be some differences in concrete raw materials. After sales will give better and reasonable proportioning suggestions according to the actual local materials to ensure the quality of concrete.
      4. Each tank of concrete needs to be mixed evenly, and there can be no fluke. If the mixed concrete does not meet the standard: for example, it is too dry, too thin, and the cement is not enough to pack slurry, you can't pour it into the hopper irresponsibly, and you must re mix and process it to meet the standard before pouring it into the hopper.
      5. During equipment construction, the drum type mixing pump shall be operated in strict accordance with the pumping process.
      6. Even if the pumping is successful on site, you need to pay attention to the operation of the equipment at any time to prevent accidents!
      It is strictly forbidden to turn sharply at high speed when the mixer is fully loaded. Non operators are forbidden to operate; The center of gravity of the mixing drum is high and slightly deviates to the right (looking at the rear of the truck). This deviation will increase when the mixing drum rotates with full load, so the truck should be very careful when turning, especially when the truck turns to the left, and do not make the speed of the mixing drum exceed 3R / min.
      The turning diameter of the mixer truck is related to the high stable speed, and the speed should be reduced when the road is uneven; According to the different uphill slopes of the road, the driver should load the materials reasonably according to the gradient of the road, so as to avoid scattering materials on the road and polluting the environment.
      The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.wanyituangou.com And consult our staff, will serve you wholeheartedly.



      <button id="htgss"></button>

      <rp id="htgss"><ruby id="htgss"><input id="htgss"></input></ruby></rp>